While the connection between exposure to asbestos and respiraratory conditions have been spoken about since the 1950's, it was not until the late 1970's that the U.S. Federal Governement banned asbestos.

But not all asbestos materials are hazardous. When materials contain 1% or less of asbestos and the structure is intact and nothing can be inhaled, it is deemed safe. Although if the fibers are damaged, then they are considered friable. The definition of friable is when a human hand can crush the material, then it is considered hazardous. If an asbestos-containing material is in this condition then an abatement is necessary.

If it is suspected that hazardous building materials may be in your facility, the first and most important step is an assessment by a qualified and experienced inspector. JMT's personnel are trained in the current AHERA and HUD regulations. This assures you that highly qualified personnel are working for you to minimize both the potential for occupant exposure and owner liability. In fact, JMT's personnel have taken hazard abatement projects from assessment to remediation which have ranged in size to more than $1,000,000.  

Our Services include:

• General Assessment of Building Material Hazards Including Identification, Location,
  Type, Quantity & Hazard Potential
• Development & Review of Alternative Remedial Approaches, Including Evaluation of No-Action
• Development of Project Specifications
• Pre-Qualification of Abatement Contractors
• Compliance with the OSHA Standards for all Personnel Involved
• Compliance with all USEPA Requirements Regarding Waste Disposal
• Proper Documentation Complying with the Present State of Scattered Regulations & Enforcement
• Preparation & Implementation of Operations & Maintenance Programs
• On-Site Air Monitoring & Abatement Project Management